ZIM12-00505 Rev. 1
TransTech IV Service Manual
11
MACHINE SETUP (CONT’D)
Inline Exchange
Warning! Software V2.24. It is not necessary to empty the waste tank before
beginning an exchange. If beginning an exchange with fluid in the waste tank ensure
that there is less fluid in the clean tank than the remaining capacity of the waste tank.
Failure to do so will result in waste tank overflowing!
Connection to Vehicle using H-Adapter
1. Connect appropriate adapters to vehicle transmission cooler lines. Attach
opposite ends to H-adapter. Ensure valve is partially open.
2. Start the vehicle.
3. Determine ATF flow direction then fully open H-adapter valve.
4. With the male to male couplers connected to the TransTech IV hoses, attach the
INLINE RETURN hose to the transmission output side of the H-adapter. Attach
CLEAN FLUID hose to the transmission return side of the H-adapter valve.
5. Close valve on H-Adapter.
