Motortech VariSCR, Руководство по эксплуатации

Страница: 79 / 112

8 Settings via the MICT
Rev. 06/2020 79
Mode
The status displays provide information about the operating mode of the emission controller.
– Configured
The following status displays are possible:
– Green: A valid configuration has been downloaded to the connected emission controller.
– Red: An error has occurred while downloading the configuration or there is no
configuration on the device
– Configured
The following status displays are possible:
– Green: The emission controller is in manual mode. Refer to the section Manual and
Automatic Operation on page 45.
– Yellow: Manual settings are made (e.g. manual pump adjustment, manual valve
adjustment).
– Red: An error occurred.
– Automatic
The following status displays are possible:
– Green: The emission controller is in automatic mode. Refer to the section Manual and
Automatic Operation on page 45.
– Red: An error occurred.
Pump
The following status displays are possible:
– Green: The pump is in operation. This also includes the cooling of the dosing valve.
– Yellow: The pump is adjusted manually or is in self test.
– Red: An error occurred.
Pump Pressure [bar]
The target value and the actual value of the pressure at the dosing valve are given as values and
shown in diagrams.
SCR
The status displays provide information on the status of the SCR system.
– State
The following status displays are possible:
– Green: The SCR system is working correctly.
– Yellow: The emission controller is in manual mode. Refer to the section Manual and
Automatic Operation on page 45.
– Red: An error occurred.