1
Getting
set
up
1.
3
User guide
User guide
1.
4
3.
Replace the battery cover and
slide into place until it locks.
4.
Plug in the travel charger with the release
tab facing upwards on the mobile. Plug
the charger into an electrical outlet.
When your mobile indicates on screen
that the battery is fully charged
(
Charge Complete
), press the release
tab and remove the charger.
Installing and charging the battery
How to get your mobile charged up.
1.
Insert the battery under the tab at the top of the battery compartment.
2.
Push battery down into position.
The battery is not fully charged when
you buy your mobile. Before you can
use your mobile you need to install
and charge the battery as shown.
Your mobile is designed to be used
only with Motorola Original
™
batteries.
When you charge the battery, the
battery level indicator in the top
panel of your screen will show how
much of the process is complete.
Your battery will perform at its
best after several full charge and
discharge cycles.
A battery that has not been used for
a long period of time needs to be
completely discharged by leaving
the mobile turned on and then
recharged 2 or 3 times before
reaching full capacity.
