Motorola V60v, Руководство пользователя

Страница: 31 / 178

Section 2A: Your PCS Phone: The Basics 22
Answering Calls
To receive a call, your phone must be turned on and have a network
connection with adequate signal strength. If your phone is locked,
you must unlock the phone to answer the call. When you receive a
call, your phone rings and/or vibrates and displays an incoming call
message.
To answer an incoming call:
䊳 When your phone rings and/or vibrates, press
N
or press
-
(
Answer
). Depending on your settings, your phone
notifies you of incoming calls as follows:
䡲
An incoming call message displays.
䡲
If available, the caller’s phone number displays.
䡲
If the caller ID is delivered, the Phonebook Match Name is
presented.
Answering a Roam Call With Call Guard Enabled
You will be notified of an incoming roam call in two ways:
䢇
Incoming roam calls have a distinctive ring. (You can select the
roam ring tone by pressing
-
[
Menu
], then Sounds, then
Ringer Types, then Roam Ringer.)
䢇
The message on your External or Main LCD will read
Roam Call
From
instead of
Call From
.
To answer a call when you are roaming and Call Guard is enabled:
䊳
Select
Answer
or press
N
to answer the call. (See
“Controlling Roaming Charges Using Call Guard” on page 72
for additional information.)
Ending a Call
To disconnect a call when you are finished:
䊳 Close the phone or press
O
.
The following options are displayed for a few seconds after you end
the call. These options are located under
Options
.
䢇
Call Again
to call again if the number is available.
䢇
Save Number
to display
Save Number
menu, if the number is not
in the Phone Book.
Note: If your phone is off, incoming calls will go to voicemail.