Motorola SURFboard SVG1202, Руководство пользователя

Страница: 49 / 58

B
SVG1202 Wireless Voice Gateway • User Guide 41
Wireless 802.11 Bridging Page
Enable wireless bridging.
Field Descriptions for the Wireless 802.11 Bridging Page
FIELD DESCRIPTION
Wireless Bridging Enable or disable wireless bridging.
Remote Bridges Build a table of remote bridge MAC addresses authorized to establish a
wireless bridge. You can connect up to four remote bridges. Typically,
you must enter your AP’s MAC address on the remote bridge.
Setting Up Your Wireless LAN
You can use the gateway as an access point for a wireless LAN (WLAN) without changing the default
settings.
Prevent unauthorized eavesdropping or access by enabling wireless security after
your WLAN is operational. The default settings provide no wireless security.
To enable security for your WLAN:
•
Encrypt wireless LAN transmissions
•
Restrict wireless LAN access to further prevent unauthorized WLAN intrusions using the Wireless
802.11 Access Control Page
Never provide your SSID, WPA or WEP passphrase, or WEP key to anyone who is not
authorized to use your WLAN.
Do not attempt to configure the gateway over a wireless connection.
Connect at least one computer to the Ethernet port on the gateway.
Configure each wireless client (station) to access the gateway.
Place wireless components away from windows. This decreases signal strength outside the intended
area.