Motorola SURFboard SVG1202 Скачать руководство пользователя страница 13

Страница: 13 / 58

SVG1202 Wireless Voice Gateway

•

User Guide

For a second telephone, plug the telephone cord of a single-line telephone into the Tel 2 port on the
gateway.

10.

Check that the LEDs on the front panel cycle through one by one in the following sequence:

SVG1202 LED Activity During Startup

LED

DESCRIPTION

POWER

Turns solid green when AC power is connected to the gateway.

Indicates power is connected properly.

RECEIVE

Blinks while scanning for a downstream (receive) channel.

Turns solid green when the downstream channel is connected.

SEND

Blinks while scanning for an upstream (send) channel.
Turns solid green when the upstream channel is connected.

ONLINE

Blinks during gateway registration and configuration.
Turns solid green when the gateway is registered.

LINK

Turns solid when an Ethernet connection is made between the
gateway and computer.

Testing the Connections

Perform the following connectivity test to verify that all the components were connected properly:
1.

Power ON the computer and log in.

Check that the POWER, RECEIVE, SEND, and LINK front panel LEDs on the gateway are either

solid or blinking. See

Front Panel

for additional status information.

Note:

The ONLINE LED should turn solid after the gateway is provisioned (activated).

Wall Mounting the Gateway

You will need a screwdriver and two M3 (#6) screws.

Print the

Wall Mounting Template

Note:

You can mount the gateway horizontally or vertically.

Remove all cables (power, coaxial, and Ethernet) from the gateway.

Choose a location on the wall to mount the gateway.

Notes:

•

Locate the unit according to local or national codes governing residential or business cable TV

and communications services.

•

Follow all local standards for installing a network interface unit/network interface device

(NIU/NID).

Before drilling holes in the wall, check the structure for potential damage to
the water, gas, or electrical lines.

Содержание SURFboard SVG1202



























































Результаты поиска

Содержание SURFboard SVG1202

Отзывы:

Похожие инструкции для SURFboard SVG1202

Бренды по названию

Популярные бренды

Motorola SURFboard SVG1202, Руководство пользователя

Результаты поиска

Содержание SURFboard SVG1202

Отзывы:

Похожие инструкции для SURFboard SVG1202

Бренды по названию

Популярные бренды