Motorola SURFboard SVG1202, Руководство пользователя

Страница: 24 / 58

B
SVG1202 Wireless Voice Gateway • User Guide 16
Testing Network Connectivity with the SVG1202
Perform the following test to check connectivity between the gateway and other devices on the
SVG1202 LAN:
1.
Select Ping LAN from the Select Utility drop-down list.
2. Enter the IP address of the computer you want to Ping in the Target field.
3. Enter the data packet size in bytes in the Ping Size field.
4. Enter the number of ping attempts in the No. of Pings field.
5. Enter the time between Ping send operations in milliseconds in the Ping Interval field.
6. Click Start Test to begin the Ping operation. The Ping results will display in the Results pane.
7. You can click
Abort Test
at any time during the test to stop the Ping operation.
8. Repeat steps 2 through 6 for each device you want to ping.
9. When done, click Clear Results to delete the Ping results in the Results pane.
Traceroute Utility
Use Traceroute to map the network path from the SVG1202 Configuration Manager to a public host.
1. Enter the IP address or Host Name of the computer you want to target for the Traceroute operation
in the Target field.
2. Enter the maximum number of hops that the Traceroute operation performs before stopping in the
Max Hops field.
3. Enter the data packet size in bytes in the Data Size field.
4. Set the base UDP port number used by Traceroute in the Base Port field. The default is 33434 . If a
UDP port is not available, this field can be used to specify an unused port range.
5. In the Resolve Host field, select
On
to list the names of hosts found during the Traceroute
operation, or select
Off
to list only the hosts IP addresses.
6. After entering the Traceroute parameters, click Start Test to begin the Traceroute operation. The
Traceroute results will display in the Results pane.
7. When done, click Clear Results to delete the Traceroute results in the Results pane.