9
SBV5120 Series VoIP Cable Modem User Guide
Home
X
Exit
Introduction
Installation
Troubleshooting
Glossary
License
9
To connect the telephone line, plug a phone wire into the Tel 1 connector. You can also connect a second
telephone line to the Tel 2 connector.
Setting Up a USB Driver
The following subsections describe setting up a USB driver. Perform the appropriate procedure for your Windows
version:
•
“Setting Up a USB Driver in Windows 98”
on page 10
•
“Setting Up a USB Driver in Windows 2000”
on page 15
•
“Setting Up a USB Driver in Windows Me”
on page 14
•
“Setting Up a USB Driver in Windows XP”
on page 18
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP”
on page 19.
The SURFboard VoIP cable modem USB driver does not support Macintosh or UNIX computers. For those
systems connect through Ethernet
only
.
Caution
Contact your cable service provider before connecting your VoIP cable
modem to your existing telephone wiring. Do not connect the telephone
wire to a traditional telephone (
PSTN
) service.
Be sure the phone connectors are neither connected together nor
connected to wall jacks on the same network.
Be sure the SURFboard VoIP Cable Modem
CD-ROM is inserted in your CD-ROM drive
before you plug in the USB cable.
