14
SBV5120 Series VoIP Cable Modem User Guide
Home
X
Exit
Introduction
Installation
Troubleshooting
Glossary
License
Setting Up a USB Driver in Windows Me
Be sure the
SURFboard VoIP Cable Modem
CD-ROM is inserted into the CD-ROM drive before you plug in the
USB cable.
1
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
“Cabling and
Startup for a Single User”
on page 7. A few seconds after you complete the USB connection, the Add New
Hardware Wizard window is displayed:
2
Click
Next
. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed. Otherwise, be sure the
SURFboard VoIP Cable Modem
CD-ROM is correctly inserted in your CD-ROM drive.
3
Click
Finish
to complete the installation.
When you finish setting up the USB driver, you can continue with
“Configuring TCP/IP in Windows 95, 98,
or Windows Me”
on page 20.
Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.
