Motorola RG3000, Руководство пользователя

Страница: 8 / 46

8
W
HAT
Y
OUR
N
ETWORK
S
ERVICE
P
ROVIDER
D
OES
The NSP (network service provider) is the company that installs your telephone service. During the initial instal-
lation your NSP does the following:
• Installs the RG3000 and connects it to your home entertainment system.
• Sets all features and services to which you have subscribed.
• Ensures that the remote control used with your RG3000 is the correct model.
• Installs the batteries in your remote control.
• Programs your remote control to operate your TV.
• Writes the remote control ID in the space provided (see form below).
A
BOUT
RF C
HANNELS
Your NSP sets your TV to operate on a specific RF channel. This setting allows you to receive video and audio
broadcast services.
Programming the TV to an RF channel is similar to setting a TV to a specific channel, such as channel 3, in
order to view movies played on your VCR. After the RF channel has been set, it is recommended that you do not
change it, as you will no longer be able to receive programming unless you retune your TV to a new RF channel.
Once your TV is tuned to the specified RF channel, the RG3000 and your remote allow you to surf through the
channel line-up and tune to any program from any TV viewing location. The table below shows the association
between the TV outputs and the RF channel.
W
RITE
Y
OUR
R
EMOTE
C
ONTROL AND
O
THER
ID
S
H
ERE
You may wish to label your remote control so you can easily identify it. Ask your service provider for labels if
they have not already been provided for you.
OUTPUT Ports RF Channel
NETWORK IN/TV OUT and/or TV OUT 3 or 4
Write your remote control ID here: Write your TV code here: Write your Gateway ID here: