Motorola Omnii, Руководство пользователя

Страница: 284 / 350

C - 8 Omnii (Windows Embedded Hand-Held 6.5) User Guide
Low Power Timeout
To extend laser life, you can select the time the scanner remains active following a successful decode. The
scanner wakes from low power mode when a barcode is scanned — a successful decode restores normal
flashing.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec,
1 min, 2 min , or 3 min .
Parameter Scanning
Setting this parameter to Enabled allows decoding of parameter barcodes.
Same Read Validate
The data is only transmitted after repeated reads give the same result. The value assigned at this parameter
determines the number of reads required, from
0 to 10 times.
Same Read Timeout
Prevents the same barcode from being read more than once. The value assigned determines after what time
period the scanner will timeout, from
0 to 2550 msec .
Diff Read Timeout
Prevents unwanted reading of other barcodes on the same label. The value assigned determines after what
time period the scanner will timeout, from
0 to 2550 msec .
Add AIM ID Prefix
The AIM ID (Association for Automatic Identification and Mobility) is an international barcode identifier. When
this parameter is enabled, the AIM ID is inserted at the beginning of the decoded barcode.
NOTE
This parameter is only used if the Trigger Mode has been set to Continuous
On and the unit is mounted in a fixed position; otherwise, ‘Low Power Timeout’
is not used.