manualshive.com logo in svg

Motorola MOTORIZR Z6TV, Руководство по обслуживанию

Поделиться
Скачать
Motorola MOTORIZR Z6TV Скачать руководство пользователя страница 6

6

February 19, 2008 

6809513A80-B

Introduction

 Z6m/Z6tv CDMA

Conventions

The following special characters and typefaces are used in this manual to emphasize 
certain types of information. 

Warranty Service Policy

The product is sold with the standard 12-month warranty terms and conditions. 
Accidental damage, misuse, and extended warranties offered by retailers are not 
supported under warranty. Non warranty repairs are available at agreed fixed 
repair prices.

Out-of-Box Failure Policy

The standard out of box failure criteria applies. Customer units that fail very early 
on after the date of sale, are to be returned to Manufacturing for root cause analysis, 
to guard against epidemic criteria. Manufacturing will bear the costs of early life 
failure.

Product Support

Customer’s original units will be repaired but not refurbished as standard. 
Appointed Motorola Service Hubs will perform warranty and non-warranty field 
service for level 2 (assemblies) and level 3 (limited PCB component). The Motorola 
High Technology Centers will perform level 4 (full component) repairs.

Customer Support

Customer support is available through dedicated Call Centers and in-country help 
desks. Product Service training is available through the local Motorola Support 
Center.

Parts Replacement

When ordering replacement parts or equipment, include the Motorola part number 
and description used in the service manual. 

When the Motorola part number of a component is not known, use the product model 
number or other related major assembly along with a description of the related 

➧

Note: Emphasizes additional information pertinent to the subject 
matter.

G

Caution: Emphasizes information about actions that may result in 
equipment damage.

E

Warning: Emphasizes information about actions that may result in 
personal injury.

P

Keys to be pressed are represented graphically. For example, instead of “Press 

the End key”, you will see “Press 

P

”.

Содержание MOTORIZR Z6TV




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды