![Motorola MOTORIZR Z6TV Скачать руководство пользователя страница 59](http://html.mh-extra.com/html/motorola/motorizr-z6tv/motorizr-z6tv_service-manual_243694059.webp)
6809513A80-B
February 19, 2008
59
Level 1 and 2 Service Manual
Disassembly
4.
Grab the keypad flex and connect it to the hydra-flex connector as shown.
5.
Handle the flex very carefully to prevent damage.
6.
The display liner must be removed prior to closing the slider outer and inner
housing (Fig.2) use a light blast of ionized air to eliminate any foreign matter
on the display and inside the display lens.
7.
After the keypad flex connector is attached to the hydra-flex, relocate the slider
guide to about half way at the slider then ski boot the inner housing into the
slider outer and at the same time, close the angle between the two components.
Make sure that the delrin rails are in the proper position.
8.
Hold the slider assembly vertically and carefully slide the slider guide to the
lower position be, extremely careful not to damage the transceiver flex that is
hanging from the rear of the assembly.
v463424
Figure 70. Connecting the Keypad Flex
K flex
Содержание MOTORIZR Z6TV
Страница 1: ...Level 1 and 2 Service Manual 6809513A80 B CDMA 850 1900 MHz MOTOROKR TM Z6m MOTORIZR TM Z6tv ...
Страница 82: ......
Страница 83: ......