Motorola MINITOR VI Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 50

background image

Foreword

Computer Software Copyrights

The Motorola products described in this manual may include copyrighted Motorola computer programs stored in
semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain
exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or
reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs
contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-
engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the
purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive
license to use that arises by operation of law in the sale of a product.

Document Copyrights

No duplication or distribution of this document or any portion thereof shall take place without the express written
permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any
means, electronic or mechanical, for any purpose without the express written permission of Motorola.

Disclaimer

The information in this document is carefully examined, and is believed to be entirely reliable. However, no
responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products
herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications
or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of
others.

Trademarks

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their
respective owners.

© 2014 Motorola Solutions, Inc.

All rights reserved.

«
1
2
3
4
...
»

Содержание MINITOR VI



















































Отзывы:

Нет отзывов

Похожие инструкции для MINITOR VI

Vision Paddle Pager

Бренд: visiplex Страницы: 2

Бренд: visiplex Страницы: 4

Бренд: GDB Страницы: 31

Бренд: Apollo Страницы: 2

Бренд: Drake Systems Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды