?
70 Alpha numeric Canned Messages
?
16 Memory Slots
?
Back-light Display
?
Slide Switch Select Beep or Vibration
?
Date and Time Display
?
Message Time stamping
?
Message Lock
?
Erase Message
?
Memory Retention
?
Lithium Battery Backup
?
Reminder Alert
?
Low Battery Indicator
?
Duplicate Message
Features
A01/ XL2000 Operation Manual
LCD Display
Beep Mode
Lock Message
Clear All Message
A,B,C,D, Tone.
Duplicate Message
Low Battery Indicator
Out Of Service
Next Page
OPERATING YOUR PAGER
POWER ON
Slide the "A" button to " " or " " to turn on the pager.
Slide the "A" button to "O" to turn off the pager. When
you turn off the pager, the pager will not receive any
messages, but the time and date clock will keep
running.
Slide the "A" button to select alert mode. " " is set in
vibration mode; " " is set in beep mode
TURN ON THE BACK-LIGHT FOR LCD
Push in the "A" button to turn on the back-light. If you
want to turn off the back-light, push the "A" button
again or wait 8 second for the automatic turn off.
SELECT "VIBRATION" OR "BEEP" MODE
READING MESSAGES?
When a message is received, the LED will flash and
alert by beep or vibration. You will see "1 PAgE" on your
LCD. It means you have one message that has not
been read. If "2 PAgES" shows, it means there are two
unread messages etc..
You push the "C" button to read the messages.
PAGE OVER
T
he LCD will show "Page Over" when there are over 16
unread messages. If you do not read the messages
and/or delete them then the LCD will read "page over"
indicating that you have too many unread messages.
MEMORY FULL
The LCD will show MEMORY FULL when the pager has 16
read or unread messages total in memory.
SETTING TIME & DATE
1. Push the "B" button to show "SET TIME?" on the LCD.
2. Push the "C" button to set the time mode.
3. Push the "C" button to change the number, push the
"B" button to move the cursor. When the cursor
moves to the end, push the "A" button to save your
setting.
CLEARING ALL MESSAGES
1. Push the "B" button to show "CLEAr ALL?" And "
"on your LCD.
2. Push the "C" button to clear all message that you
have read and unlock. This will not clear any
unread and locked messages.
3. Push the "A" button to return to stand by and not
clear the messages.
**If there is no message in your pager then "CLEAr
ALL?" would not show on the LCD.
LOCKING MESSAGE
When you are reading messages, push "B" button and
the " " will be appear on the screen to lock the
message.
HOLD DOWN FULLY
When you lock over 8 messages, "HOLD FULL" will
display on LCD.
