Motorola MC55 - Enterprise Digital Assistant, Руководство пользователя, Страница: 225 / 245

C - 18 MC55 User Guide
a.
Enter a seven character password in the
Password:
field. A strong password must contain at least seven
characters and contain at least three of the following: uppercase and lowercase letters, numerals, and
punctuation.
b.
Re-enter the password in the
Confirm:
field.
6.
Tap .
7.
In the horizontal scroll, select Hint. Enter a hint to remember the password if you forget it.
8.
Tap .
9.
In the text box, enter a hint for a password reminder.
10.
Tap .
Using the RS507 Hands-free Imager
An RS507 Hands-free Imager can be used with the MC55 to capture bar code data.
To set up the MC55 and RS507:
1.
Tap Start > BTScannerCtlPanel icon.
2.
Select the BT Scanner checkbox and then select the appropriate Com port from the drop-down list.
3.
Tap Save and Exit.
4.
Tap Start > Display_BD_Address icon. A bar code displays.
5.
Point the RS507 to the bar code. The RS507 reads the bar code and begins pairing with the MC55. If required,
enter PIN (12345).
6.
Launch a scanning enabled application.
7.
Point the RS507 at a bar code to read the bar code data.
Refer to the RS507 Hands-free Imager Product Reference Guide for more information.
Assisted GPS
GPS can be used in stand-alone or Assisted GPS (A-GPS) modes. A Stand-alone GPS receiver downloads data
from GPS satellites. It can take several minutes to get a fix. By using GPS Location servers, A-GPS dramatically
improves the performance of the Time To First Fix (TTFF) of GPS receivers by providing them with data that they
would ordinarily have to download from the GPS satellites and other aiding data that helps the acquisition. With the
A-GPS data, GPS receivers can operate faster and more reliably.
A-GPS follows the Secure User Plane Location (SUPL) protocol which allows the MC55 to communicate with a
location server.
To configure SUPL on the MC55:
1.
Tap Start > Settings > System > GPS Setup icon.