Motorola EWR6300, Руководство пользователя

Страница: 17 / 52

Mesh Enabled Architecture EWR/PWR Users Guide
3 1/2 x 1/4 inch bolt
1/4 Flat Washer
1/4 Flat Washer
1/4 Lock Washer
1/4 Hex Nut
Note: All Hardware is Stainless Steel
Figure 2-5. C-Clamp Bracket Assembly
3. Position the bracket in the desired location and securely tighten the two bracket bolts.
4. If required, loosen the Pivot Bolt and the Angle Locking Bolt ( Figure 2-6 ) so that the
antenna connector is positioned vertically.
5. Ensure that the antenna connector is still vertical and tighten the Pivot Bolt using a 7/16-
inch open-end wrench or socket wrench.
6. Tighten the Angle Locking Bolt using a #1 Phillips screwdriver.
9