2
Insert the power cord plug into the MUC dual pin
connector at the bottom of the MUC.
3
Plug the power cord into an AC outlet.
4
Turn off the radio.
5
Insert the radio or battery into the charging pocket
with the radio or battery facing away from the
contacts .
NOTICE:
• This Multi-Unit Charger clone up to two radios
(two Source radios and two Target radios). Refer
to
Cloning with a MUC (Optional Accessory) on
for more information.
• More information on the Multi-Unit Charger
operation is available in the Instruction Sheets
provided with the MUC. For more information on
the parts and their part numbers, refer to
Chapter
DLR Series Charger LED Indicators
The following table explains the meaning of each status
and LED indicator:
Table 7: Indicators
Status
LED Indicator
Comments
Power On
Green for approxi-
mately one sec-
ond
-
Charging
Steady Red
-
Charged
Steady Green
-
Error
1
Fast-blinking red
-
Standby
2
Slowly blinking
amber
-
Battery Level
Status
Blink Red one
time
Battery low
Blink Amber two
times
Battery medium
1
Normally, re-positioning the battery pack will correct this issue.
2
Battery temperature is too warm or too cold or wrong power voltage is used.
English
22
Содержание DLR1060
Страница 74: ...English 74 ...
Страница 87: ...Turn radio off and remove the battery Dry with soft cloth Do not use radio until com pletely dry English 87 ...
Страница 172: ...Français Canada 81 ...
Страница 186: ...Turn radio off and remove the battery Dry with soft cloth Do not use radio until completely dry Français Canada 95 ...