If...
Then...
Message not
transmitted or
received
Ensure that the
PTT
button is com-
pletely pressed when transmitting.
Confirm that the radios have the
same settings and PROFILE ID. En-
sure that radios are on the same
channel.
Ensure that you hear the Talk Per-
mit Tone before talking. Speaking
before hearing the tone results in
cytting out the first few words of the
transmission. Refer to
ther information.
Recharge, replace and/or reposition
the batteries. See
Obstructions and operating indoors,
or in vehicles, may create interfer-
ences. Change locations. See
Transmitting and Receiving on page
27
.
If...
Then...
Heavy static or
interference
Radios are too close; they must be
at least five feet apart.
Radios are too far apart or obsta-
cles are interfering with transmis-
sion.
Low batteries
Recharge or replace Li-Ion battery.
Extreme operating temperatures af-
fect battery life.
.
Drop-in Charger
LED light does
not blink
Verify that the radio/battery is prop-
erly inserted and check the battery/
charger contacts to ensure that they
are clean and charging pin is insert-
ed correctly.
Tray Single Unit Charger (SUC) on
page 19
English
84
Содержание DLR1060
Страница 74: ...English 74 ...
Страница 87: ...Turn radio off and remove the battery Dry with soft cloth Do not use radio until com pletely dry English 87 ...
Страница 172: ...Français Canada 81 ...
Страница 186: ...Turn radio off and remove the battery Dry with soft cloth Do not use radio until completely dry Français Canada 95 ...