Troubleshooting
The following table explains the ways to troubleshoot if the
symptom occurred:
Symptoms and Solutions
If...
Then...
No Power
Recharge or replace the Li-Ion bat-
tery.
Extreme operating temperatures
may affect battery life.
Unable to read
the radio (using
the CPS)
Ensure that one side of the pro-
gramming cable is connected to the
radio and the other side of the pro-
gramming cable is connected to the
USB port.
Verify that the switch on the pro-
gramming cable is set at “Digital”
If...
Then...
position or “Flash” position in older
version programming cable.
Ensure that the radio is positioned
correctly inside the Single Unit
Charger (radio making proper con-
tact with the charger).
Radio gener-
ates continuous
tone when
PTT
is pressed
Radio does not transmit when it is
receiving as receive mode has high-
er priority than transmit mode.
Press the
PTT
button again when
mitting and Receiving on page 27
.
Radio does not
transmit when
pressing the ra-
dio
PTT
button
If there are other users who are us-
ing the channel, the radio does not
transmit. Try again after verifying
that nobody else is talking.
By default, the
PTT
button is disa-
bled on the radio whenever there is
an earpiece connected to it.
Make sure to use the earpiece in-
line
PTT
button to transmit instead.
English
81
Содержание DLR1060
Страница 74: ...English 74 ...
Страница 87: ...Turn radio off and remove the battery Dry with soft cloth Do not use radio until com pletely dry English 87 ...
Страница 172: ...Français Canada 81 ...
Страница 186: ...Turn radio off and remove the battery Dry with soft cloth Do not use radio until completely dry Français Canada 95 ...