8
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
151
CNFG and ENV Commands
8.1
Overview
You can use the factory-installed debug monitor, PPCBug, to modify certain parameters
contained in the board's Non-Volatile RAM (NVRAM), also known as Battery Backed-up RAM
(BBRAM).
z
The Board Information Block in NVRAM contains various elements concerning operating
parameters of the hardware. Use the PPCBug command CNFG to change those
parameters.
z
Use the PPCBug command ENV to change configured PPCBug parameters in NVRAM.
The CNFG and ENV commands are both described in the
PPCBug Firmware Package User's
Manual.
Refer to that manual for general information about their use and capabilities.
The following paragraphs present additional information about CNFG and ENV that is specific
to the PPCBug debugger, along with the parameters that can be configured with the ENV
command.
8.2
CNFG - Configure Board Information
Use this command to display and configure the Board Information Block, which is stored in the
NVRAM. The Board Information Block lists details of your specific board, such as the Board
Serial Number, the Board Identifier, the Bus Clock Speed and other operational or ID
characteristics. The example below displays a typical Board Information Block:
Detail
Value
Board (PWA) Serial Number = “2717994"
Board Identifier
= “CPCI-6020-60X-0XX"
Artwork (PWA) Identifier
= “01-W3938F02B"
MPU Clock Speed
= “500"
Bus Clock Speed
= “067"
Ethernet Address
= $0001AF0A1B2C
Local SCSI Identifier*
= “07”
System Serial Number
= “1234567"
System Identifier
= “Motorola CPCI-6020603-001a”
License Identifier
= “12345678 “
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com