18
Parent Unit Menu Options
4.8 Set Temperature Format
The temperature reading from the temperature sensor at the back
of the Baby Unit will be displayed at the top of the Parent Unit LCD
screen. You can switch temperature format between Centigrade and
Fahrenheit as follows:
1.
Press the
M
button and the menu bar will pop up.
3. Press the
+
UP button or
-
DOWN button to select
o
C or
o
F.
4. Press
M
button to exit.
4.9 Add Camera (Registration)
The Baby Unit(Camera) is pre-registered to your Parent Unit. You do
not need to register it again unless the Baby Unit (Camera) loses its
link with the Parent Unit.
To add a new compatible camera to the Parent Unit, proceed as
follows:
1.
Press the
M
MENU button and the menu bar will pop up.
the camera list
1
2
3
4
appear on the screen.
3. Press the
+
UP or
-
DOWN button to select the desired amera,
and press the
O
/ button to start searching for a camera unit,
with "
press PAIR on cam
" shown.
Note:
If a baby unit is currently paired with the Parent Unit, its
camera location (with a against it) cannot be selected for a
new registration.
4. Press and hold the
PAIR
button on the rear of the camera until
the Parent Unit finds the camera, beeps and
PAIR OK
appears
on the screen. The video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this
current Baby Unit again will cancel its old registration.
2. Scroll
to
then confirm with
O
/ button.
+
UP /
-
DOWN
2. Scroll
to
then confirm with
O
/ button,
+
UP /
-
DOWN
