Room Monitor
39
11. Room Monitor
You can use your CD1 handset to monitor the sounds in
another room. If the sounds reach a certain level the handset
will automatically dial out to a preset external number or to
another handset. When the Room Monitor is set to
On
, the
handset will display
Room Monitor On
and only the microphone
will be active to monitor the sound levels in the room. Both
the speaker and receiver will be set to
Off
and the handset
will not ring if there’s any incoming call.
11.1
To switch Room Monitor On
1.
Press
Menu
, scroll
D
to
Extra
then press
Select
.
Room
Monitor
is highlighted. Press
Select
.
Mode
will be
highlighted.
2.
Press
Select
, scroll
D
to
On
then press
Select
.
Set to ON
is
displayed for 2 seconds. The handset returns to idle
screen and display as
Room Monitor On
.
To switch off
Room Monitor
press
Off
.
11.2
To change the monitor level
The monitor level can be set to High or Low, the default
setting is "Low".
To increase the sensitivity of the Room Monitor:
1.
Press
Menu
, scroll
D
to
Level
, press
Select
and scroll
U
or
D
to select
Low
or
High
setting.
11.3
To set the dial out number
1.
Press
Menu
, scroll
D
to
Call to
and press
Select
.
2.
Use the
U
or
D
key to select
External
or
Internal
.
External
1.
Press
Select
and
Enter Number:
prompt will be displayed.
2.
Enter the number and press
Save
.
Saved
will be
displayed.
When
Room Monitor
is switched on and the sound level
reaches a certain level the number will be automatically
dialled.
Internal
1.
Press
Select
and the registered handset will be listed, for
example "Handset 2".
2.
Scroll
U
or
D
to select the handset the
Room Monitor
will
call if the noise levels reach a certain level.
3.
Press
Select
and
Set to handset 2
is displayed.
NOTE
If only one handset is registered the display prompts "Not
available" and returns to the previous screen. You must
Motorola_CD1_IFU_EN_UK.book Page 39 Wednesday, December 22, 2010 3:40 PM
