34
Base settings
3.
Scroll
D
to
Key Beep
and press
Select
.
4.
Scroll
U
or
D
to
Off
or
On
then press
Select
.
5.
Press
O
to return to standby mode.
8.13
To set PBX access code
If the CD1 is connected to a switchboard, you may need to
enter a one-digit access code in the dialling sequence to be
able to connect to the outside line.
The access code will be displayed at the beginning of a
number on the screen. The code can be up to 4 digits long.
The access code will not be used when you dial the number
manually (such as when you are not dialling from the
phonebook). This allows you to make calls to other
switchboard extensions.
1.
Press
Menu
, scroll
D
to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3.
Scroll
D
to
Access Code
and press
Select
.
4.
Scroll
U
or
D
to
Off
,
On
or
Set Code
then press
Select
.
If you select
Set Code
, enter the switchboard access code
e.g. 9 then press
Save
.
5.
Press
O
to return to standby mode.
9. Base settings
9.1
To set the base ringtone
Select from 5 base ringtones.
You will hear a sample ring as you scroll to each ringtone.
1.
Press
Menu
, scroll
D
to
Settings
and press
Select
.
2.
Scroll
D
to
Set Base
and press
Select
.
3.
Ringtone
is highlighted. Press
Select
.
4.
Scroll
U
or
D
to the ringtone that you want and press
Select
.
5.
Press
O
to return to standby mode.
9.2
To set the base ringer volume
The base has 5 ring volume settings plus Off.
NOTE
Ring tone 1 and ring tone 3 when set at ring volume 5 will
provide an extra loud ringer on the base.
1.
Press
Menu
, scroll
D
to
Settings
and press
Select
.
2.
Scroll
D
to
Set Base
and press
Select
.
3.
Scroll
D
to
Ringer volume
and press
Select
.
4.
Scroll
U
or
D
to display the volume level that you want
and press
Save
.
Motorola_CD1_IFU_EN_UK.book Page 34 Wednesday, December 22, 2010 3:40 PM