Motorola Canopy T1/E1 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 73

background image

Canopy

T1/E1

Multiplexer

September

2004

T1/E1

Multiplexer

FPGA

Version

3.4

Page

72 of 73

4.2.2

Department

of

Communications

–

Canada

Canadian Compliance Statement

This class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment Regulations.

This device complies with RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device can not cause harmful interference; and (2) this
device must accept any interference received, including interference that can cause
undesired operation.

This device is certified to the requirements of RSS-139. The use of this device in a
system operating either partially or completely outdoors can require the user to obtain a
license for the system according to Canadian regulations. For further information, contact
your local Industry Canada office.

4.2.3

European

Telecommunications

Standards

Institute

Statement of Compliance

Information to User

This equipment has been tested and found to comply with the European
Telecommunications Standard ETS 300.328. This standard covers Wideband Data
Transmission Systems referred to in CEPT Recommendation T/R 10.01.

This type accepted equipment is designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, can cause harmful interference to
radio communications.

4.3

TRADEMARKS,

PRODUCT

NAMES,

AND

SERVICE

NAMES

MOTOROLA, the stylized M Logo and all other trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat & Tm. Office. Canopy is a trademark of Motorola,
Inc. All other product or service names are the property of their respective owners.

Motorola, Inc
Broadband Wireless Technology Center
1299 East Algonquin Road
Schaumburg, IL 60196
USA

http://www.motorola.com/canopy

Issue

3

«
...
70
71
72
73
»

Содержание Canopy T1/E1










































































Отзывы:

Нет отзывов

Похожие инструкции для Canopy T1/E1

Бренд: Gamry Страницы: 6

Бренд: Defort Страницы: 112

JungleMUX SONET 86447

Бренд: GE Страницы: 28

Бренд: GE Страницы: 16

Бренд: GE Страницы: 24

StoreSafe SDVR-10

Бренд: GE Страницы: 73

JungleMUX 86445-31

Бренд: GE Страницы: 95

Бренд: GE Страницы: 83

86498 ETHER-1000 UNIT

Бренд: GE Страницы: 174

Бренд: Hanna Страницы: 28

Бренд: CEM Страницы: 2

Бренд: CEM Страницы: 22

Бренд: Tenma Страницы: 2

Бренд: Tenma Страницы: 3

Бренд: Tenma Страницы: 20

Бренд: Jeulin Страницы: 24

Бренд: Gossen MetraWatt Страницы: 72

Бренд: Gossen MetraWatt Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды