Canopy
T1/E1
Multiplexer
June
2004
T1/E1
Multiplexer
Release
3.1
45 of 69
2.5.2
Changing
the
Administrator
Password
There is only one account for the Canopy T1/E1 Multiplexer—the administrator account.
The username may not be changed, however the password may be changed at any time.
Figure 20: Change Password dialogue box
Procedure 15: Changing Administrator password using the EMS
Use this procedure to change the password from the EMS.
1. Select
File
→
Change password
from the main menu.
RESULT:
The
Change Password
dialogue box opens (shown in
Figure 20
).
2. Type the old password, then press Enter or Tab.
3. Type the new password, then press Enter or Tab.
4. Enter the new password again, then press Enter or Tab.
5. To accept, click
Change
.
To reject, click
Cancel
.
end of procedure
Issue
1
Page
