Installation
Package Contents
Ensure the package contains the following:
l
Avigilon Network Video Recorder
l
Rack sliding rail assembly kit
l
Cable management arm assembly kit
l
Bezel and key
l
Power cables (may be provided in a separate box)
Installing the Rack Rails and Cable Management Arm
If the recorder will be kept in a server rack, install the Rack Sliding Rails and the Cable Management Arm
provided in the recorder package. Follow the procedures outlined in the
Rack Installation Instructions
and
the
CMA Installation Instructions
provided in the assembly kits.
Note:
The supplied Rack Sliding Rails are compatible with square and round hole racks.
Connecting Cables
Refer to the diagrams in the Overview section for the location of the different connectors. Make the
following connections as required:
1. Connect a KVM switch or separate keyboard, mouse and monitor to the recorder.
l
The keyboard and mouse can be connected to any USB port on the recorder.
l
The monitor can be connected to any video connector at the front or back of the recorder.
2. Connect the recorder to your network using an Ethernet cable.
3. For out-of-band management access and functionality, connect Ethernet cable to the OOBM
connector.
4. Connect a power cable to each power supply at the back of the recorder.
5. Press the power button on the front of the recorder. Check that the recorder LED indicators display
the correct status.
Installation
4
