Advanced Features
English
83
Enhancing GPS Performance
Sometimes, the GPS feature may be unable to complete a
location calculation successfully. You then see a message
indicating that your radio cannot connect to enough visible
satellites.
To maximize the ability of your radio to determine a fix, please
note the following guidelines:
•
For your initial fix, hold the radio in the face position.
•
Stay in the open. The GPS feature works best where there is
nothing between your radio and a large amount of open sky.
The Outdoor Location Feature (Using GPS)
This feature allows you to determine your current location using
a location menu, as well as your current distance and bearing in
relation to another location. Radio location may be requested
and reported over-the-air.
Your radio stores up to a maximum of sixty (60) programmable
location coordinates, also known as waypoints. When the
memory is full, the next waypoints automatically replaces the
oldest waypoints in the radio.
The radio also stores four (4) preprogrammed waypoints. These
coordinates
cannot
be deleted.
Note:
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Enabling MGRS Coordinates
This feature can only be enabled through CPS configuration.
When the MGRS coordinate is enabled, all location coordinates
are displayed in MGRS format, including the editable locations
in GPS.
Programmable
Waypoints
Preprogrammed
Waypoints
User-configurable location
coordinates.
Fixed location coordinates:
•
Home
•
Emergency
•
Last Known Location
•
Destination
Coordinates can be deleted
one at a time, or all at once.
Coordinates cannot be
deleted.
APX_2000_M2_Global.book Page 83 Thursday, May 30, 2013 9:49 PM
