Motorola solutions MCC 7100 IP, Руководство по установке и эксплуатации

Страница: 63 / 170

3
In the
PowerShell
command line, navigate to the
Supplemental_Utils
directory on the
Windows Supplemental CD.
4 Run the following command:
.\ImportGroupPolicy.ps1 “ <GPO name> ”
where
<GPO name>
is the name of the GPO that you want to import from the Windows
Supplemental CD to the domain controller.
If you enter an incorrect GPO name, the command line provides you with the list of the correct
GPOs and you can renter the command.
NOTICE:
In case of incorrect Powershell policy that prevents the script from running, an error
appears saying that the
.\ImportGroupPolicy.ps1
file cannot be loaded because
the execution of scripts is disabled on this system. To resolve the issue, set the
execution policy by running the following command:
Set-ExecutionPolicy RemoteSigned
Step example:
In this example, the administrator entered an incorrect GPO name, they were
provided with the list of the correct GPOs, and reran the command successfully.
PS E:\Supplemental_Utils> .\ImportGroupPolicy.ps1 “MCC7100 IP Consoles Outside RNd”
The name of GPO is incorrect. The list of available GPOs you can import from current GPO
- MCC 7100 FIPS Disable Outside RNI Console
- MCC7100 IP Consoles Outside RNI
Please run script again with valid GPO name!
PS E:\Supplemental_Utils> .\ImportGroupPolicy.ps1 “MCC7100 IP Consoles Outside RNI”
Copying MCC7100 IP Consoles Outside RNI GPO... Please wait patiently...
DisplayName : MCC7100 IP Consoles Outside RNI
DomainName : ucs.astro
Owner : UCS\Domain Admins
Id : 8cc542c9-1d2e-433c-9393-bb89efbdbe58
GpoStatus : AllSettingsEnabled
Description : WHK Version:R04.01.00
Version:A7.9_v1
Revision History:
Date ModifiedComment
12/02/2010 Added Comments to the GPO
CreationTime : 12/4/2013 10:30:05 AM
ModificationTime : 3/19/2014 9:50:41 AM
UserVersion : AD Version: 7, SysVol Version: 7
ComputerVersion : AD Version: 7, SysVol Version: 7
WmiFilter :
Information:3/19/2014 9:50:42 AM:ImportGroupPolicy.ps1:Exit with 0.
Peripheral Configuration
During the installation, the MCC 7100 IP Dispatch Console, software automatically configures the input
(internal microphone) and output (external speakers) of the console computer as the source for voice
and audio. These settings are saved as the default profile in the Peripheral Configuration Tool.
To modify the following settings, perform the procedures provided in this section in the Control Panel of
the Windows operating system:
• If you want to modify the default profile in the Peripheral Configuration Tool.
NOTICE:
You can modify the Peripheral Configuration Tool default profile only from the
Windows operating system-level. If you modify the profile in the Peripheral Configuration
Tool, you can only save it as a new profile. You cannot save changes to the default profile.
• If you want to disable a specific peripheral connected to the computer. In this way, you prevent it
from appearing in the Peripheral Configuration Tool and being available to Windows operating
system as a selectable default audio device.
MN000672A01-E
Chapter 2: MCC 7100 IP Dispatch Console Setup and Installation
Send Feedback 63