Motorola solutions MCC 7100 IP, Руководство по установке и эксплуатации

Страница: 136 / 170

If… Then…
If you want to unmap a
Motorola peripheral,
a Select the USB AIM tab.
b
From the drop-down list next to the device that you want
unmap, select the blank selection.
If you want to replace
the Motorola headset 1
with a non-Motorola pe-
ripheral,
a
Select the
Audio Outputs
tab.
b
From the drop-down list next to the device that you want to
configure as your headset speaker, select
Headset 1
Speaker
.
c
Select the
Audio Inputs
tab.
d From the drop-down list next to the device that you want to
configure as your headset microphone, select
Headset 1
Microphone
.
e
Select the
PTT/Monitor
tab.
f From the drop-down list next to the device that you want to
configure as your headset Push-to-Talk (PTT), select
Headset 1 PTT .
If you want to replace
the Motorola desktop
microphone with a non-
Motorola peripheral,
a Select the Audio Inputs tab.
b From the drop-down list next to the device that you want
map as your desktop microphone, select
Desktop Micro-
phone
.
If you want to replace
the Motorola footswitch
with a non-Motorola pe-
ripheral,
a Select the PTT/Monitor tab.
b From the drop-down list next to the device that you want
map as your footswitch, select
Footswitch .
2 Save the profile:
• To save the changes to the existing profile, select
Apply .
• To save the changes as a new profile, select
Save As
.
3 Close the Peripheral Configuration Tool by clicking OK .
Deleting a Profile
Perform this procedure to selectively choose which profiles to remove from the tool, or delete all
profiles except for the currently active profile that does not appear in the list of profiles to delete.
Procedure:
1
From the Windows
Start
menu, select
All Programs
→
Motorola
→
MCC 7100 Dispatch
→
Peripheral Configuration Tool
.
2
In the
Profile
pane, click
Delete
.
3 In the Select Profile(s) to Delete window, perform one of the following actions:
• To remove all the profiles except for the currently active profile, select the
Select All
check
box.
• To remove a single profile, select the check box next to it.
4 Click Delete .
5
Confirm the deletion by clicking
OK
.
MN000672A01-E
Chapter 5: Console Dispatch Status and Peripheral Configuration Tool
136 Send Feedback