7
3 – Place the Wing motor so that the motor is inclined by 1
°
. As indicated in Fig. 12 below.
With the gate leaf in the closed position and the motor fixed onto rear bracket, turn and slide the
screw piston to extend piston to the end of end of stroke. Turn the screw back one complete turn.
4 – Fix the front mounting bracket to the gate leaf whilst ensuring the slight motor incline as
mentioned above. Fix the motor to the front bracket by pin and grub screw. See Items 31 and 26 on
the exploded diagram below.
5 – Ensure the motor is manually released. Push the gate leaf open and closed and check the
movement is smooth with no significant friction points.
6. Wiring
The motor is supplied pre-wired with power cable, which needs to be wired into control panel (MC2 –
separate instruction manual)
