12A
12B
11A
11B
EN
EN
06
• E2 appears.
To program E2, continue in step 3 from E2 menu (page 11B).
To exit the programming press ↑↓ simultaneously.
01
• Press MENU for
10 seconds.
00 disabled function
01 enabled function
This menu allows you to enable/disable soft start.
With soft start function enabled, at each motion beginning, the
control board will manage the start of the motor, gradually
increasing in the first second of working.
(Factory default
01)
02
• E0 appears.
Press ↓ once.
03
• E1 appears.
Press MENU for 3
seconds.
05
• Press MENU to
save the defined
function.
SOFT START
05. PROGRAMMING "E"
04
• Appears the
function currently set.
If you want, change
the function to 00 or
01, using ↑↓.
COURTESY LIGHT TIME
01
• Press MENU for
10 seconds.
02
• E0 appears.
Press ↓ twice.
03
• E2 appears.
Press MENU for 3
seconds.
05
• Press MENU to
save the defined time.
This menu lets you set the time (1-99 minutes), that the courtesy
light stays on after the closing of the gate.
The E2 menu is only available if the courtesy light function is
activated in P8 menu (see page 10A)
(Factory default
01
)
06
• E3 appears.
To program E3, continue in step 3 from E3 menu (page 12A).
To exit the programming press ↑↓ simultaneously.
04
•
Appears the time
set from factory. If
you want, change
time between 1 and
99 sec., using ↑↓.
05. PROGRAMMING "E"
