Motorline professional MC50SE, Руководство пользователя и инсталлятора

Страница: 10 / 18

10A 10B 9A 9B
EN EN
06 • P8 appears.
To program P8, continue in step 3 from P8 menu (page 9B).
To exit the programming press ↑↓ simultaneously.
04. PROGRAMMING "P"
Functioning in automatic
mode
1st impulse - OPENS
2nd impulse - STOPS,
TIMER AND CLOSES
(IF P4>00)
3rd impulse - INVERTS
Functioning in step by
step mode
1st impulse - OPENS
2nd impulse - STOPS
3rd impulse - CLOSES
4th impulse - STOPS
If is fully open and timed,
the gate closes
Functioning in
condominium mode
Does not accept orders
during opening and
pause time, in closure it
reverses (either by trans-
mitter or control board
start button)
factory default ( 00) factory default ( 00) factory default ( 00)
This menu allows you to set the gate's operating mode.
02 • P0 appears.
Press ↓ seven times.
01 • Press MENU for 3
seconds.
03 • P7 appears.
Press MENU for 3
seconds.
05 • Press MENU to
save the defined
function.
04 • Appears the
function currently set.
If you want, change
the function to 00, 01
or 02, using ↑↓.
OPERATING LOGIC
06 • P9 appears.
To program P9, continue in step 3 from P9 menu (page 10A).
To exit the programming press ↑↓ simultaneously.
FLASHING LIGHT
04 • Appears the
function currently set.
If you want, change
the function to 00, 01
or 02, using ↑↓.
Intermittent
(opening and closing)
During the gate's
opening/closing
movement, the
flashing light will
work intermittently.
During movement of
the gate (opening and
closing), the flashing
light will remain lit.
Courtesy light
The light will remain
lit during the time
defined in the E2
menu (page 12A).
Factory defaut ( 00 )
01 • Press MENU for 3
seconds.
02 • P0 appears.
Press ↓ eight times.
03 • P8 appears.
Press MENU for 3
seconds.
05 • Press MENU to
save the defined
function.
04. PROGRAMMING "P"