Motor Scrubber STORM JET3, Руководство пользователя

Страница: 5 / 17

IMPORTANT: Flush out STORM
®
with clean water after every use. Your STORM
®
has a special high speed swirl nozzle, which
must be kept clean to maintain its performance.
Attach M-Wipes pouch
to belt using press studs.
Pull M-Wipes through
the split funnel. Tear wipe at perforation,
sharply pull downwards
over velcro to release.
For installation of the M-Wipe System* (order separately) to the
existing Backpack follow the instructions below.
Store STORM
®
in holster
on waste pouch after
use.
Feed coiled cable
through holster loop
on waste pouch.
Dispose of used wipes
safely and securly into
the waste pouch.
Attach M-Wipes waste
pouch to belt using
press studs.
Insert Non Absorbant
M-Wipes into the pouch
dipenser.
*PLEASE NOTE : If your serial number is after the following numbers ( STORM
®
2064, JET 2144) the M-Wipes
system should fit your existing backpack. If your serial number is before ( STORM
®
2064, JET 2144) you will
need to upgrade to the new STORM
®
backpack.
Put on the Backpack Adjust Straps Fill Bottle (page 14)
Connect Water (page 14) Connect Electrics (page 12) Prime the Pump (page 15)
Charge
Battery (page 13)
Spraying
Disinfectant (page 23)
Store in
Belt Holster
Put on the Backpack Adjust Straps Fill Bottle (page 14)
Connect Electrics (page 12) Connect Water (page 14)
Charge Battery (page 13)
Attach/Change
MotorScrubber
brush (page 20)
Clean with
JET3 (page 19)
Adjust Handle Length (page 18)
Prime the
Pump (page 15)
Quick Start
Guide
Quick Start
Guide
08 09