© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULDNSINS003
03-21-18
www.motorcitywashworks.com
14
Using
the pictures below, locate and mount the DRY N’ SHINE sign and BEATER BAR mounts to the cross
beam.
ENTRANCE VIEW
1 7-1/2"
5 0-
5
8
"
91"
DRY N' SHINE
S ECURE THE SIGN MOUNT 17-1/2"
FROM LE G WELDMENT
S ECURE BEA TER BA R MOUNT 50-5/8"
FROM LE G WELDMENT
S ECURE P/S SIGN MOUNT MOUNT 91"
FROM LE G WELDMENT
SECURE BE ATER BAR
MOUNT O N THE CROSS BEAM
SECURE SIGNS
MOUNT O N MOUNT
SECURE SIGNS
MOUNT ON THE CRO SS BEAM
SECURE SPLASHGUARD
O N BE ATER BAR
Pic #35 Dimensions Pic #36 Assembly
Finally
mount the
SIGN
, the
SPLASH GUARD
and the sonar to the cross beam (see picture 34, 35 and
36)
Locate
the boxes containing the
COLOR SKINZ™
covers and install on each of the legs and arms (see
below).
Pic #36 Color` Skinz
SINGLE TOP WHEEL (SINGLE WHEEL) WITH TIRE SHINER SYSTEM:
FOR DRIVER SIDE TOP WHEEL:
Position
the
DRIVER SIDE SUPERSHINER
according to its installation manual and according to the
conveyor trap door or to the wall shown on pictures five thru twelve (see early section). Position the
Supershiner brushes assemblies on top of the conveyor guide rail (see Picture #37).
Positions
the top wheel frame close to its desired position (see Picture #37) according to the
recommended distances shown on pictures 5 thru 12. Cut the conveyor outside guide rail following the
Supershiner installation manual recommendations. Secure and level the Supershiner with anchor bolts.
Remove
the
SQUARE CONNECTING BAR
between the two Supershiner base plate and position the top
wheel according to previous instruction. Secure and level the top wheel frame.
Position
and secure the
PASSENGER SIDE SUPERSHINER
according to its installation manual.
Follow
the installation instruction previously described for the rest of the top wheel.
