MOTO GUZZI
V850 Eldorado Rider’s Handbook
33
VALVE GEARING
Tappet clearance (See fig. 23)
Every 3000 kms. (1800 miles) or any time valve operation is too noisy. check tappet
clearance.
This adjustment is made on a cold engine with the piston at TDC and both valves closed
while the piston is on its compression stroke.
Using the wrench supplied in the tool kit, undo nut A and screw in or out screw B.
Correct clearance is:
-
Inlet valve
0.15 mm. (.0059")
-
Exhaust valve
0.25 mm. (.0098")
Use a feeler gauge (C) to check this clearance. When this is excessive. there will be
noisy valve operation.
If it is less. the valves may not close fully causing compression loss, overheating of the
engine, etc.
On a new engine, this adjustment must be made after the first 500 kms. (300 miles).
Fig. 23
Checking valve timing
The engine Is timed when the gears are set as shown at A and 8 in fig. 24. A proper
check of valve timing is always done better in any officially appointed Moto Guzzi dealer
shop.
Содержание V850 Eldorado
