MOTO GUZZI
V850 Eldorado Rider’s Handbook
38
ADJUSTMENTS
Generator belt (See fig. 28)
After long service the belt may slacken and in such case it should be tensioned. Normal
belt slack A is 1 cm. per 10 kgs. (.039"/21 lbs ). The belt is tightened as follows:
-
unscrew bolts B which secure the outer half-pulley to the hub.
-
remove the external half pulley.
-
remove one or more spacing collars to reduce the width of the race.
-
If it is necessary to remove more than one spacer, they should be placed at the front
and rear of the pulley.
-
Finally, re-fit the outer half-pulley, tightening its 3 securing bolts (B).
Fig. 28
Clutch lever (See fig- 29)
This lever should be adjusted when the free play at the handlebar is more or less than 4
mm. (1/8"). Slacken thumb screw B and screw in or out adjuster A to obtain the correct
distance. Don't forget to re-lock thumb screw B. If the distance is less, the clutch may slip
causing the plates to wear out. if it is more, there may be incomplete disengagement of
the clutch and consequent noisy gear shifting. This adjustment can also be carried out by
slackening nut D and acting on adjuster C bolted on the battery bracket.
Содержание V850 Eldorado
