MOTO GUZZI V850 Eldorado, Руководство для наездников

Страница: 29 / 49

MOTO GUZZI V850 Eldorado Rider’s Handbook
29
Stripping of carburetor (See fig. 18)
Remove:
1. Mixture chamber cover (1) complete with cable
adjusting nut and spring (2), after loosening
screws (3).
2. Throttle slide (4) with taper needle (5).
3. Throttle slide stop screw and spring (6).
4. Plug and washer (7).
5. Bowl (8).
6. Pilot jet (19).
7. Accelerator pump (10) with main jet (11) and
atomizer (13).
8. Atomizer (13).
9. Float (14) with securing pin (15).
10. Needle (16).
11. Pilot air screw (17) with spring.
12. Adaptor screw (18) with washer.
13. Adaptor (19).
14. Adaptor filter (20).
15. Air control plug (21) with screw and nut.
16. Plug securing screw (22).
17. Spring (23) with air control plug (24).
Fig 18
After the carburetor has been stripped and all parts cleaned with an air jet, it is a good
practice to inspect and clean the fuel filters and line from the tank.
Air filter (See fig. 19)
The dry type filter is located in a suitable housing secured to the frame. Air to the
carburetors is taken directly through a rubber sleeve from the filter box. When the filter is
too dirty, replace it with original equipment.