motium MLC-1010 Скачать руководство пользователя страница 36

Страница: 36 / 41

MLC-1010

UFF

IEW

LCD Monitor

Impact:

No damage with a 9g steel ball dropped into the centre of the panel
from a height of 30cm.

Static Load: 5kg load over a 10mm area for 10 seconds.

Hardness:

3H pencil pressure, 1N @ 45 degrees.

Durability write test:

10,000,000 times, with a force of 250g and a stylus of 0.8mm radius.

Durability knock test:

1,000,000 times, with a force of 250g, 3Hz R8/HS60.

Touch Screen controller

Resolution:

2,048

2,048.

Report rate:

250 points/second maximum with USB interface.
160 points/second maximum with RS232 interface.

Response time:

20ms.

Accuracy:

M/-0.5% tolerance.

Interface:

USB1.1 or RS232 (EIA/TIA-232-F compatible.
Both interfaces are transient protected.

Data rate:

RS232 data rate is 9,600 bps 8N1.

Touch Screen driver software

Calibration:

Fast 4-point position.

Compensation:

Accuracy: 9-point and 25-point linearity position.

Edge

compensation.

Draw test:

Position and linearity verification.

Controller setting:

Support multiple controllers.

Dynamic

add/remove

controllers.

Change controller interface without reboot.

Languages:

Supports 10 languages for Windows.

Mouse emulator:

Right and left button emulation.

Click/drawing

mode.

Sound notification:

sound.

Sound on touch contact.

Sound on touch release.

Double click:

Configurable double click speed.

Configurable double click area.

OS support:

Windows 2000, XP, Vista and Windows 7.

Windows

Embedded

Windows CE.NET (4.x, 5.0). CE 6.0.

Linux (up to Kernel 2.6.x), 32-bit and 64-bit.

MS-DOS: supports display resolutions: 640x480, 800x600,
1024x768 and 1280x1024.

Mac OS 9.x and OS X (Power PC, Intel CPU).

QNX Neutrino RTOS V6.3.

COM Port Support:

Supports COM1 to COM256 for Windows and Linux. COM1 to
COM8 for DOS.

Содержание MLC-1010










































Результаты поиска

Содержание MLC-1010

Отзывы:

Похожие инструкции для MLC-1010

Бренды по названию

Популярные бренды

motium MLC-1010, Руководство пользователя

Результаты поиска

Содержание MLC-1010

Отзывы:

Похожие инструкции для MLC-1010

Бренды по названию

Популярные бренды