motium MLC-1010, Руководство пользователя

Страница: 15 / 41

User Manual Rev 1.0 15
4. Connector pin assignments
This chapter lists the pin assignments for the Signal and Power Connector on the
monitor’s rear panel. The connector wiring is standard on Motium
Tuff View monitors,
(although different models have different functionality).
4.1. Connector type
The connector on the monitor is a 37-pin panel-mount connector, with 24 male pins fitted.
All unused pins have a dummy plug fitted, to ensure the monitor is water and dust proof
when the connector is not mated.
The mating part (i.e., the female connector on the cable) is:
•
Connector model number: AS614-35SN-090.
•
Crimp socket number: 38943-22. (Suitable for 22 to 26 AWG wire.)
•
Filler plug number: 600300-22.
These components are available from Motium, as a kit.
4.2. Pin assignments
The figures below show the front and rear views of the cable-side connector. The pin
assignments are listed in the table on the following page.
Figure 4. Left: Drawing looking at the front (socket-side) of the connector
on the cable.
Right: Drawing looking at the rear (wire-side) of the connector on
the cable.