23
SUB > WIRELS > SYNC:
This option will ini-
tiate syncing with an SWT-2 equipped wireless
subwoofer. With this option, the soundbar’s Sub
Out RCA connection is turned off.
Please note:
MartinLogan subwoofers utilizing SWT-2 tech-
nology will reference this wireless technology on
their connection panel.
Please note:
At one
time MartinLogan utilized a wireless subwoofer
connection system named “SWT-1”. Subwoofers
equipped with SWT-1 technology are NOT
capable of wireless connectivity with this sound-
bar—although a wired connection will work for
these subwoofers.
Press the subwoofer’s sync button and hold for 3
seconds. The sub’s LED will blink quickly. Sync
by pressing the enter button. The soundbar will
respond with ‘PUSH.BTN’. Pairing of the soundbar
and subwoofer may take up to 30 seconds.
If pairing has completed successfully, the sub’s LED
will stop blinking and remain on and the soundbar
will display “SYNCED”. If a link is not established,
the subwoofer’s LED will start blinking slowly and the
soundbar will display “FAILED”. Repeat if syncing fails.
SUB > WIRELS > TRN.OFF:
[TURN OFF] This
option configures the soundbar to handle all bass
information, and when selected, will not output
information via the wired or wireless subwoofer
connections. Activate by pressing the enter but-
ton and the soundbar will respond with ‘OFF’.
Activating this option performs the same function as
‘SUB > NO.SUB’.
MENU OPTION: BASS LEVEL
BASS.LV:
[BASS LEVEL] Enter the ‘BASS.LV’
submenu by pressing the enter button. Here you
can configure bass output by ±10dB in increments
of 2dB.
BASS.LV > –10
to
+10:
Using the up/down
directional buttons, choose the desired bass level
(from –10dB to +10dB). Bass level output will be
automatically set to match the value currently displayed.
MENU OPTION: INSTALL
INSTAL:
[INSTALL] Enter the ‘INSTAL’ submenu
by pressing the enter button. The settings in this
menu will adjust the soundbar’s equalization and
voicing for optimal performance in on-wall or shelf
top installations.
INSTAL > ON.SHLF:
[ON SHELF] This option
configures the soundbar’s audio output to sound best
in shelf-top installations. Activate by pressing the enter
button and the soundbar will respond with ‘SET’.
INSTAL > ON.WALL:
[ON WALL] This option
configures the soundbar’s audio output to sound best
in on-wall installations. Activate by pressing the enter
button and the soundbar will respond with ‘SET’.
MENU OPTION: SURROUND
SURRND:
[SURROUND] Enter the ‘SURRND’ sub-
menu by pressing the enter button. This menu allows
you to turn simulated surround channels on or off
when the soundbar detects a multi-channel source.
SURRND > +6dB:
[SURROUND ON +6dB]
This option configures the soundbar (when it
detects 5.1-channel encoded content) to fully
reproduce all 5.1-channels of information including
simulated surround channels with 6dB of extra
output. Activate by pressing the enter button and
the soundbar will respond with ‘SET’.
SURRND > 0dB:
[SURROUND ON 0dB] This
option configures the soundbar (when it detects
5.1-channel encoded content) to fully reproduce
