Motion VISION X, Руководство пользователя

Страница: 21 / 39

21
A
N
O
VERVIEW OF THE
M
ENU
S
TRUCTURE
**
SUB
[subwoofer, select subwoofer configuration]
|
–› *
†
NO.SUB
[no sub, select when not using a subwoofer]
|
–› WIRED
[wired, select when attaching a subwoofer via a cable]
|
–› WIRELS
[wireless, configure when using a wireless subwoofer]
|
–› SYNC
[sync, select to begin syncing wireless subwoofer]
|
–› TRN.OFF
[turn off, select to deactivate wireless transmitter]
BASS.LV
[bass level, adjust bass level]
|
–› +10
[increases bass output by 10dB]
|
–› +8
[increases bass output by 8dB]
|
–› +6
[increases bass output by 6dB]
|
–› +4
[increases bass output by 4dB]
|
–› +2
[increases bass output by 2dB]
|
–› * † 0
[normal bass level]
|
–› –2
[decreases bass output by 2dB]
|
–› –4
[decreases bass output by 4dB]
|
–› –6
[decreases bass output by 6dB]
|
–› –8
[decreases bass output by 8dB]
|
–› –10
[decreases bass output by 10dB]
INSTAL
[install, select installation location]
|
–› * † ON.SHLF
[on-shelf, select when set on a flat surface]
|
–› ON.WALL
[on-wall, select when mounted to a wall]
SURRND
[surround, configure surround options for 5.1-channel sources]
|
–›
†
+6dB
[on: +6dB, increases level of simulated surrounds]
|
–› *0dB
[on: 0dB, use simulated surrounds]
|
–› OFF
[off, turns off simulated surrounds]
STEREO
[stereo, configure options for 2-channel stereo sources]
|
–› WIDE
[wide, creates a wider stereo image]
|
–› * † VOICE+
[voice plus, simulates a center channel for stereo sources]
|
–› NORMAL
[normal, use original stereo signal]
MODES
[modes, select EQ listening mode]
|
–› † BASS+
[bass plus mode, sets EQ mode for enhanced bass]
|
–› *NORMAL
[normal mode, returns EQ to normal levels]
|
–› NIGHT
[night mode, sets EQ mode for night listening]
DISPLY
[display, select display mode]
|
–› † BRIGHT
[bright, use full display brightness at all times]
|
–› DIM
[dim, use dimmed display at all times]
|
–› *AUTO.BR
[auto bright, display turns off automatically]
|
–› AUTO.DM
[auto dim, display turns off automatically]
POWER
[power, configure power on/off behavior]
|
–› * † AUTO
[auto, soundbar turns itself off and on as needed]
|
–› FULL.ON
[full on, the soundbar is always powered on]
LEARN
[learn remote codes for second remote control]
|
–› VOL+
[volume up, program to respond to second remote]
|
–› VOL–
[volume down, program to respond to second remote]
|
–› MUTE
[mute, program to respond to second remote]
|
–› NX.INPT
[next input, program to respond to second remote]
|
–› PR.INPT
[previous input, program to respond to second remote]
|
–› UP
[up, program to respond to second remote]
|
–› DOWN
[down, program to respond to second remote]
|
–› LEFT
[left, program to respond to second remote]
|
–› RIGHT
[right, program to respond to second remote]
|
–› ENTER
[enter, program to respond to second remote]
|
–› NITE.MD
[night mode, program to respond to second remote]
|
–› NRML.MD
[normal mode, program to respond to second remote]
|
–› BASS.MD
[bass+ , program to respond to second remote]
|
–› PWR.TGL
[power toggle, program to respond to second remote]
|
–› PWR.ON
[power on, program to respond to second remote]
|
–› PWR.OFF
[power off, program to respond to second remote]
|
–› MENU
[menu, program menu to respond to second remote]
|
–› OPTIC
[optical input, program input to respond to second remote]
|
–› COAX
[coaxial input, program input to respond to second remote]
|
–› ANALOG
[analog input, program input to respond to second remote]
|
–› PLAYFI
[Play-Fi , program input to respond to second remote]
|
–› ERASE
[erase, clear programmed codes for second remote control]
|
–› CONFRM
[confirm factory defaults, choose YES or NO]
SRC.NAM
[source name, assign new names to inputs]
|
–› OPTIC
[digital optical, assign a new name for this input]
|
–› COAX
[digital coaxial, assign a new name for this input]
|
–› ANALOG
[analog, assign a new name for this input]
SERVCE
[service, advanced controls]
|
–› FRMWRE
[firmware, display firmware version]
|
–› RESET
[reset soundbar to original factory settings]
|
–› AT.HOME
[at home, factory defaults for home use]
|
|
–› CONFRM
[confirm factory defaults, choose YES or NO]
|
–› STORE
[store, factory defaults for in-store use]
|
–› CONFRM
[confirm factory defaults, choose YES or NO]
*AT.HOME: Factory default setting, home use.
† STORE: Factory default setting, in-store use.
** Some menu options may vary depending on manufacturing date.