25
DISPLY > AUTO.DM:
[AUTO DIM] This option
configures the soundbar’s display to be on at a
reduced brightness when a setting (such as volume
or input) is changed. After a few seconds the display
will turn off. Activate by pressing the enter button
and the soundbar will respond with ‘SET’.
MENU OPTION: POWER
POWER:
Enter the ‘POWER’ submenu by pressing
the enter button. Here you may adjust how the sound-
bar turns on and off.
POWER > AUTO:
This option configures the
soundbar to turn itself off after no audio signal is
detected for approximately 30 minutes. When the
soundbar detects an audio signal, it will immedi-
ately turn itself on. Activate by pressing the enter
button and the soundbar will respond with ‘SET’.
Please note:
When set to ‘AUTO’, if the soundbar
is manually turned off (using the power button on
the top panel or remote control), the soundbar will
not respond to an incoming audio signal and will
not turn on automatically. In this situation, turn the
soundbar on using the power button on the top
panel or remote control and the soundbar will
resume automatic power handling.
POWER > FULL.ON:
[FULL ON] This option
configures the soundbar to remain on at all times
until it is manually turned off using the power button
on the top panel or remote control. Activate by
pressing the enter button and the soundbar will
respond with ‘SET’.
MENU OPTION: LEARN
Please note:
There may be remotes that the sound-
bar cannot learn or that the soundbar can not learn
correctly. Due to the number of available remotes, it is
impossible to advise which remotes will or will not work.
Please note:
When learning from a second
remote, you will likely find it does not have buttons
that directly correspond with all available soundbar
commands. Not all commands have to be pro-
grammed. Some remotes offer ‘function’ buttons (F1,
F2, etc.) that can be used to program unique sound-
bar commands such as ‘NITE.MD’ or ‘OPTIC’.
Please note:
Some remote controls offer discrete
‘power on’ and ‘power off’ buttons. Some offer a
single button to toggle power on and off. The learn-
ing function of the soundbar allows you to program
either scenario.
LEARN:
Enter the ‘LEARN’ submenu by pressing the
enter button. The settings in this menu program the
soundbar to respond to a second remote control.
The factory supplied remote control will always
work with the soundbar, even if the soundbar is
programmed to respond to a second remote.
Using the up/down directional buttons, you can
select and program the following commands:
• VOL+
[]
• VOL–
[VOLUME –]
• MUTE
[MUTE VOLUME]
• NX.INPT
[NEXT INPUT]
• PR.INPT
[PREVIOUS INPUT]
• UP
• DOWN
• LEFT
• RIGHT
• ENTER
• NITE.MD
[NIGHT MODE]
• NRML.MD
[NORMAL MODE]
• BASS.MD
[BASS+ MODE]
• PWR.TGL
[POWER TOGGLE]
(toggle on/off)
• PWR.ON
[POWER ON]
(power on only)
• PWR.OFF
[POWER OFF]
(power off only)
• MENU
• OPTIC
[OPTICAL INPUT]
(direct access)
• COAX
[COAXIAL INPUT]
(direct access)
