Motion Concepts F Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 60

background image

WARNING!

For systems equipped with power recline and ESR, always inspect/test the headrest (down

tube) for possible interference over the full range of recline. If interference occurs, the length of the
down tube must be modified as necessary.

NOTE:

• It may be necessary to remove and modify the back cushion cover in order to access the headrest
mounting holes on the back pan.
• An optional shim plate is available and may be installed between the clamp assembly and the back
pan to provide addtional spacing/clearance when required.

*WARNING!

This Motion Concepts seating system has NOT

been crash tested in combination with this wheelchair base
and is NOT approved for use as a vehicle seat during transport

.

When travelling in a motor vehicle, the user must be properly
secured in a motor vehicle seat with safety belts securely fastened.

5.11 Headrests

A Motion Concepts offers basic and adjustable headrest options for installation
onto the wheelchair back cushion. The headrest clamp hardware is designed
to install into existing mounting holes in the back pan.

WARNING!

Injury hazard during use of the whelchair as a vehicle

seat if a headrest is wrongly adjusted or not installed! This can
cause the neck to be hyperextended during collisions

*

!

- 48 -

Installation/Adjustment:

1. Using the hardware provided, align and install the headrest clamp assembly into the existing mounting holes
in the back pan (

1

).

2. Secure the headrest pad to the horizontal headrest rod via the mounting hardware provided (

2

).

3. Adjust the headrest pad to the desired depth via the headrest rod by loosening and tightening the mounting
hardware (

3

).

4. Adjust the overall height of the headrest pad/mounting post via the clamp assembly (

4

). For proper set-up

the headrest should be adjusted to the user's ear height.

5.10.1 Basic Headrest Set-Up and Installation:

3

4

1

2

5.0

5.0

SEATING SYSTEM COMFORT ADJUSTMENTS

SEATING SYSTEM COMFORT ADJUSTMENTS

«
...
46
47
48
49
50
...
»

Содержание F Series





























































Отзывы:

Нет отзывов

Похожие инструкции для F Series

Бренд: Yamaha Страницы: 78

Бренд: Fast Страницы: 42

Бренд: DARAY Страницы: 28

Бренд: Haenim Страницы: 2

Бренд: ADVANCED HOME CARE Страницы: 16

Бренд: Raymarine Страницы: 24

Бренд: Hansen Страницы: 72

Бренд: AAT Страницы: 16

Бренд: AAT Страницы: 40

Platinum Series

Бренд: Dairy Tech Страницы: 38

Бренд: H&S Страницы: 34

Бренд: QAL Medical Страницы: 42

Бренд: Abbott Страницы: 2

FreeStyle Libre

Бренд: Abbott Страницы: 3

Бренд: abc Страницы: 8

Бренд: Cambridge Audio Страницы: 2

Бренд: Quanser Страницы: 12

Бренд: Cambro Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды