- 23 -
4.1.2 M-Series Control Boxes
4.1 Seat/Motor Control Boxes
4.0
4.0
ELECTRONICS
ELECTRONICS
The seat control box is the brain behind our TRx Power Positioning Systems. It is responsible for controlling
the available motor functions
(i.e.; tilt, recline, elevate, etc..),
as well as signaling the safety limits and lockouts
(
i.e.; DLO Limit, Reduced Speed Drive, etc..
).
Motion Concepts utilizes state of the art electronics to operate our power positioning systems and ensure
the safe operation of the powered wheelchair system. Your F-Series power positioning systems is configured
with our
M-Series
Electronics. The type and number of electronic components will vary depending on the
complexity of the seating system, the type of powerbase onto which the system is installed, and the specific
needs of the end user. Our Motion Concepts electronics are designed to interface with all power base
electronics platforms and specialty drive controls – including PG, Q-Logic, MK6, RNet, Curtis and DX2
There are three key components common to all our electronics:
Seat Control Boxes
,
Wiring Harnesses
and
Limit Switches/Sensors.
This chapter provides information and instructions related to each of the
key electronic components.
WARNING!
Your Motion Concepts power positioning system has been specifically programmed
and configured for use prior to delivery. While certain seating system features and functions
may be adjusted by the user and/or attendant following delivery, to ensure your seating system
is programmed correctly and safely, we strongly recommend that any programming changes to
the electronics only be peformed by a qualified techincian.
The control boxes for the M-Series electronics are designed for maximum programmability and function, and
their compact design occupies minimal space on the seating system. The fully modular design significantly
reduces and simplifies the electronic wiring on complex and/or specialty control seating systems. Our M-Series
electronics includes the
M600 series
(multi-function) seat control boxes
(up to 6 functions
); the
M200 series
(dual function) seat control boxes; as well as a basic single channel
M136
control box
(for single switch
operation).
Both the dual function and multi-function control boxes are designed to work seamlessly with
our multi-functional
Remote Attendant Control
(included)
. The Remote Attendant Control serves dual purpose
as both an attendant control box for the available seat functions, as well as a hand-held electronics programmer.
The programming capabilities of the remote eliminates the need to adjust dip switches and jumpers inside
the control box, and eliminate the need to incorporate extra electronics into the existing wiring configuration.
M600 Series Seat Control
(incl. Remote Attendant Control )
Multi (3+) Function
Box
M200 Series Seat Control
(incl. Remote Attendant Control )
Dual Function Box
Remote
Attendant Control
Single Function Box
M136 Seat Control
(single switch operated)
Содержание F Series
Страница 2: ......
