- 27 -
4.0
4.0
ELECTRONICS
ELECTRONICS
(max. combined tilt/recline angle)
168°
Max Tilt/Recline Limit
55°
Max Tilt Limit*
Important!
Ensure base is on a level surface when adjusting limits
Front
4.3.3 Max Tilt (Tilt/Recline) Limit
The Max Tilt limit switch established the maximum back angle for the seating system at full Tilt or Recline or
Tilt/Recline combined. The function of this switch is to prevent the back angle from extending beyond a
maximum pre-set angle. Motion Concepts seating systems are typically preset at the factory to the maximum
allowable angle and do not require any further adjustment unless the max. angle needs to be decreased (see
Warning!
below).
Tilt-Only Module:
Max. Tilt Limit = 50°
Scissor Lift/Tilt Module:
Max. Tilt Limit = 45°
Tilt/Recline, Recline-Only:
Max. Tilt/Recline Limit = 168°
WARNING!
When establishing the max tilt limit, always consider the size and location of any personal
gear that may be carried on the wheelchair, as it could cause interference between the backrest and the
wheelchair base when fully tilted/reclined, and damage the actuator and/or wheelchair.
45°
Max Scissor Lift/Tilt Limit*
4.3.4 Elevating Seat Lockout Switch
Elevating seat systems, when combined with tilt and/or recline functions, are equipped with an elevating seat
lockout switch to prevent the PES actuator from elevating (up or down) when the system is tilted or reclined
beyond the established home limit.
All Users:
No Elevate if Tilt/Recline “Out of Home”
(Max Home Limit = 20°)
User Weight ≥ 175 lbs.:
No Tilt* if PES “Out of Home”
(PES Home = fully retracted)
*
system must be tilted (max. 20
°
) prior to elevate
Front
>20 deg.
P
O
Important!
Ensure base is on a level surface when adjusting settings
Max 20°
Содержание F Series
Страница 2: ......
