Motic RED100 Series, Инструкция по эксплуатации

Страница: 13 / 20

13
3.1 First time use
Before installing and using the biological microscope, make sure to read carefully the Safety Instructions (See Chapter 1).
When unpacking and handling, please do not touch the optical surfaces.
3. FIRST TIME USE & OPERATION
• After unpacking, place the biological microscope on a flat workbench
and remove any foam padding or spacer used to prevent vibration during
transportation.
• Connect the charger to the power supply. Before plugging in, keep in
mind that the working voltage of the biological microscope shall be the
same as the supply voltage. (Figure 1)
• Rotate the brightness control to the desired illumination. (Figure 3)
• After use, turn the brightness control to the minimum position, and then
turn off the power and put on the dustproof cover.
• Turn on the power switch at the back of the arm. (Figure 2)
Note: Make sure that the brightness control is in the minimum position
before turning on or off the power switch.
Figure 1
Figure 2
Figure 3
1
2