Motic RED100 Series, Инструкция по эксплуатации

Страница: 15 / 20

15
3.3 Modification of biological microscope
3.3.1 Replace the head
• Unscrew the head lock screw and lift out the existing body tube. (Figure 5a)
• Insert the new body tube vertically into pilot hole of the main unit, resting it on the shoulder. (Figure 5b)
• Tighten the head lock screw.
3.3.2 Replace the objective
Unplug the biological microscope before making any modifications.
Figure 6
• Lower the stage completely with the coarse focus knob.
• Rotate the nosepiece to move the objective to be replaced to the side.
• Unscrew the objective and remove it downward.
• Fix the new objective into the hole on the nosepiece. Be very careful to match
the threads correctly, the objective should screw in smoothly and easily.
Make sure the objective is screwed in tightly.
• If one of the nosepiece holes is not used for an objective a dustproof cap
should be screwed into the vacancy to prevent dust from entering. (Figure 6)
Figure 5a Figure 5b
1
2