36
6.8 Miscellaneous
●
Automatic voltage selection device is applicable to worldwide voltage configuration, but it is
recommended to use the power cable matches with the rated voltage of your area. Incorrect use of
power cable may cause fire, or damage to the device
●
For external power cable, power cable with ground protection must be used.
●
To prevent electric shock, make sure the power switch is turned off before connecting the
power
cable.
●
Please use standard slide, other slides are not allowed to be loaded into the device.
●
The product should not be placed in the place with direct sunlight, dust, mechanical vibrations, high
temperature or high humidity.
●
Grounding:
Please make sure the device is connected to a wall outlet grounding Terminal, if the
device is not grounded, our company no longer guarantee the safety of electrical equipment and
EMC
performance.
●
If an emergency occurs, remove the power cord. Please install the device in a place where you can
disconnect the power cable connector, or the socket is placed in the place where you can remove
the power cord.
●
Please keep this device in the environment with good ventilation.
●
Please do not place the device in position which is difficult to disconnect power cable connector.
●
Please do not put non-relevant stuff on the device
●
When replacing the fuse, please refer to the label parameter
"FUSE: 250V T2.5AL"
near the
equipment power socket.
●
LED lamp life time is 25000 hrs, please contact after-sales service dept if there is any failures.
6.9 Lens Cleaning
●
This needs to be operated by profession engineer. Please contact your nearest Motic Distributor, or
contact our technical service department directly.
6.10 Cleaning of Components with Painting and Plastic components
●
Prohibiting the use of organic solvents (such as alcohol, ether, dilution, etc) or dilution of them
for cleaning. Otherwise it will cause the paint fading or peeling.
●
Stubborn stain can be wiped with gauze moistened with soft detergent.
●
Plastic surface can only be cleaned with a soft cloth moistened with water.
6.11 Idle Time
●
When the device is not used, use vinyl dust cover to cover the device and put it in the low humidity
area which is not easy to have mould.
Содержание 1100300500438
Страница 15: ...14 c Then click Next button d Select installation path and click Next button ...
Страница 32: ...31 Fig B Fig C ...
