10
a. Please make sure that all power is off before connecting.
b. Follow the steps below for connection.
●
Plug the USB3.0 cable to USB port of scanner, and connect the other end to computer USB3.0 port.
●
Make sure system power is off, plug the power cord to the power socket of the
scanner, and connect the other end to a safety rated Power outlet.
2.3 Slide Tray
Note:
MoticEasyScan One is offered with 1-slide tray.
(Fig. 7)
2.3.1 Placement Procedure
2.3.1.1 Slide Loading Procedure:
Hold the two sides of the slide with the thumb and index finger, barcode position is in the direction of
Fig. 7-
①
, follow the direction of Fig. 8a, load the slide under the clip Fig. 7-
②
with 15° degree angle, then
push it to the end after adjusting to correct angel.
Push down the barcode in the direction of clip Fig. 7-
①
and in the meantime the other hand move
beneath clip of Fig. 7-
①
to make sure the whole slide is well loaded into the slide slot in flat position
Fig. 8b.
Содержание 1100300500438
Страница 15: ...14 c Then click Next button d Select installation path and click Next button ...
Страница 32: ...31 Fig B Fig C ...
